Water is the most important to us. If we have a look around, we can’t even do anything if we have no water. Almost 70% of the earth is made up of water, and the water we use is only 3%. So, why don’t we all try to save that precious thing? According to science, there would be no water left on earth if we just keep wasting water. So we should devise ways to save this precious gift from God. For that cause, we got some Best Anode rod for Softened Water.
What will happen if one day we got up from our bed and we need to take a shower now, brush our teeth, make breakfast, wash our face, drink water, and we need water to make tea or coffee. And there is smelly water coming from the tank that almost smells like a rotten egg. Then all our dreams of Good Morning fade away, and we can do nothing unless we get rid of that disgusting smell. So, what is this strange odor that affects so many people all around the world?
Best Anode Rod for Softened Water 2021
44″ Aluminum Zinc Anode Rod
||CHECK ON Amazon|
Corro-Protec CP-R Water Heater Powered Titanium
||CHECK ON Amazon|
Magnesium Anode Rod
||CHECK ON Amazon|
About Fluid Aluminum/Zinc Flexible Anode Rod
||CHECK ON AMAZON|
Blue Lightning Magnesium Flexible Anode Rod
||CHECK ON Amazon|
Having an anode rod will make your life out of hell. Because if there would be no anode rod in your water heater or your water tank. Then there are chances that they will rust quickly and leave behind water with a disgusting smell of hydrogen sulfide. This water is also not good for health. An anode Rod protects the metal lining in your water heater, and it’s going to protect it from being rusted. Each one of those is higher on the galvanic scale than Steel, so they will promptly erode to ensure tank steel.
An anode rod can be of magnesium, zinc, and AluminumAluminum. An anode rod is intended to live just for some time, and it needs to be replaced. The magnesium anode rod is supposed to work better in an area where water is softer. Aluminum rods are appropriate for water with a high PH. The zinc anode works better where the water heater smells like rotten eggs. These all anodes work better in removing smell from water tanks.
The anodes are in the wrong way into the tank’s highest point and stretch out almost the whole way to the base. When the tank is loaded up with water, an electrolytic response starts whereby the limited quantity of uncovered steel is ensured, and the sacrificial anode is gradually devoured. When there is little anode left, the steel rusts, and the water radiator at last breaks.
Then again, if the anode rod is replaced, the warmer will never flop because of rusting through.
Reviews of anode rod for softened Water
1.44 Aluminum Zinc Anode Rod
Get Rid of Rotten Smell
The rods made with aluminum-zinc alloy are perfect for eliminating the rotten smell from your water tank and water heater. Because if the water is stuck in your water tank for a longer time, then hydrogen sulfide gas (H2S) is produced. So, this smell is particularly unpleasant, and it causes health problems too. Get rid of the rotten smell by using aluminum-zinc alloy rods.
The adaptable 44 Inch-long anode pole is pivoted into four sections. Each part is under 12 Inches permitting you to replace anode poles effectively even in a tight space. Just securely cut it for adjustment of size according to your water tank’s size, more limited with a basic hacksaw.
One Size Fits All Models
This anode softener is practically for all water radiators, including; A.O. Smith, Rheem, Reliance, Richmond, Kenmore, State, GE, and a lot more than additionally utilize the norm ¾” NPT Anode Rod Connection. This water warmer anode rod makes everything simple with all you require, Anode Rod, Teflon Sealing Tape, and 1-1/16″ chrome completed attachment, all in one box for our customers.
If you want to get rid of the rotten smell from your water tank, this is the best choice. It is effortless to install. It is almost perfect for almost all types of water heaters. It comes with all the necessary components required for easy installation. It saves your tank, and it is also very affordable.
These anodes are designed to be easily installed and replaced regularly. When the anode bar is exhausted and completely rotted, the water radiator starts to rust, and then it starts to crack and fail. If you keep inspecting it and change the anode regularly after 2 or 3 years, it will increase your water heater tank’s lifespan. So, instead of changing the water heater, keep inspecting your anode.
2.Corro-Protec CP-R Water Heater Powered Titanium
Permanent Corrosion Protection
This anode softener rod is designed to fight against any level of water hardness. It gives permanent protection against corrosion. Dispose of your water heat odor issue by eliminating the spoiled egg smell brought about by hydrogen sulfide with our seriously controlled anode bar and getting permanent protection against corrosion.
This anode rod works efficiently by reducing mineral accumulation on the tank that will cause corrosion and destroy water quality. This anode rod is able to help the water quality while reducing stress on the tank to reduce energy costs. Its design is energy saving.
Quick and Easy Installation
This anode rod is very quick and easy to install. You don’t have to call a plumber for its installation. A step by step instruction pdf is included in the set, which only takes fifteen minutes to install.
You should simply replace the first anode with the Corro-Protec, and you need to connect the current rectifier. Our Corro-Protec joined with the electrical current, will give improved erosion assurance. It ensures the long life of your water heater.
This anode rod ensures the long life of your water heaters. It can last for more than 20 years. It is made up of stable material and generates permanent protection instead of temporary protection. It has an energy-efficient design. Its design is universal and can be fitted in any tank. It stops corrosion inside the tank.
3.Magnesium Anode Rod
This sacrificial anode attracts bacteria by not allowing bacteria to attack the tank. This anode rod sacrifices itself to save the tank. You can increase the lifetime of your tank by replacing the Magnesium anode rod after a few years. The magnesium anode rod will sacrifice itself and will save your money to buy a new water heater.
This 44 Inch-long bar is pivoted into four sections. Each part is under 12 Inches permitting you to replace anode rods virtually even in a limited space. Just securely cut it more limited with a basic hacksaw according to your requirement. It has the capacity to fit in narrow places.
If we compare aluminum rods with magnesium rods, then magnesium rods produce a stronger current than aluminum rods, making them efficient in keeping your water tank away from corrosion. Magnesium anode rod attracts particles that ordinarily cause rust in iron and steel. These particles are what prompt the anode bar to degrade after some time.
Our magnesium anode pole is 44 inches and is appropriate for most models available. Your timely substitution of the magnesium anode pole will adequately expand the water radiator’s life while likewise sparing force and improving warming effectiveness.
4.About Fluid Aluminum/Zinc Flexible Anode Rod
Eliminate Rotten Egg Smell
There are places where there is such a significant amount of sulfur in the water that both hot and cold water has a definite smell. However, generally, the hot water reeks. Get rid of rotten egg smell, and this problem was solved by an anode made from a different material.
As this anode rod is made up of different materials, the company has added a new feature. This rod is flexible and can be easily adjusted in tight places. This unique alloy made of aluminum/zinc will make your work easier.
Aluminum/Zinc Anode Rod
Aluminum/zinc anodes are 92% aluminum, 7% zinc, and 1% trace metals. If we replace the standard anode with an aluminum/zinc anode, given that no water conditioner is being utilized. Aluminum/zinc anode rod regularly works in this condition that the reduced current of the anode will decrease the amount of H2 gas produced in the tank.
Regardless of whether your water heater is situated in a little or restricted space, this 44 Inch-long bar is pivoted into four fragments, less than 12 inches in length each. Each fragment can be effortlessly brought down, individually, into your water heater.
On the off chance that the general length is excessively long, just securely cut it more limited with a straightforward hacksaw. Almost everything is included in the set required for installation. It comes with a certified instruction manual for easy installation.
The aluminum/zinc anode rod is designed to decay rather than your Water’s Heater Tank itself. It protects your water tank from decaying and increases its lifetime. It is very easy to install, even for beginners. A combination of AluminumAluminum and zinc makes it more efficient for any type of water heater.
5.Blue Lightning Magnesium Flexible Anode Rod
These Blue Lightning Magnesium anodes Rod are flexible and can be adjusted easily at narrow places. Magnesium anode rod can help us to get rid of bad smell, and it can prevent our water tank from rusting.
Magnesium Anode Rod is made of top-notch magnesium. It is more solid and more secure contrasted. Magnesium anode rods are much better as far as health issues are concerned. Magnesium can improve your health by supporting blood and heart problems. It is likewise helpful in bringing down nervousness, mitigating feminine issues, strengthening bones, and a not insignificant rundown of different favorable circumstances.
Its working mechanism is simple and very effective. It provides good protection against corrosion. If you live in an area where there is hard water, then it is better to select a magnesium rod. Simultaneously, they are very costly to buy. These rods are very professional, and it can prevent them from rusting. These rods are very handy to use, but it also depends on the locality of water tanks.
Blue Light Magnesium anode rod is flexible. It has a hex plug with a 44 inch (four sections) anode rod, and it can be fitted in any narrow space. This magnesium anode rod is very good for health. It protects us from the unhealthy side effects of AluminumAluminum. Blue Lightning Anode Rod provides you with the best solution, and it ensures better water quality.
Advantages of Anode Rod for Softened Water
Get Rid of Smelly Water
If water stays in the water heater for a long time, it produces hydrogen sulfide gas. It is because there are sulfate reducing-anaerobic bacteria that, when combined with sulfur and hydrogen, are made by the activity of the anode to cause spoiled egg scent.
Anode protection reduces steel corrosion, yet it builds hydrogen gas advancement from the steel surface. In case the anode current is greater, it will bring about more significant levels of gas development. The hydrogen produced at the ensured steel surface combines with sulfide in the water to create the H2S smell, which is perceivable on parts per billion bases. The smell can be decreased underneath location limits by lessening the hydrogen gas.
If there were no anode rods, then it would become very tough for us to maintain a good quality of water in our water heaters or water tanks. In the case of no anode rod in the water heater is present, the whole tank will get corroded, and there would be a bad smell as well. The use of water from a corroded heater would be very disgusting as there would be a bad smell. The Anode Rod sacrificed itself to prevent the water tank from corrosion and bad smell. Its working mechanism is quite simple.
When two metals are found in the water heater, the one with more negative electrochemical potential is going to corrode first. If you want to protect your water heaters, then companies are providing us with magnesium anode rods, aluminum anode rods, zinc anode rods, and a combination of aluminum/zinc anode rods.
These anode rods constantly release positive ions in water. These anode rods degrade over time. They all have a different lifespan. Some last for two years and some can last for more than 20 years. It all depends on what quality you choose.
Double Life of Water Heater
This sacrificial anode will sacrifice their lives to save water heaters. They attract all the corrosive materials to themselves. It’s like our parents trying to save us from troubles by facing all hard situations by themselves.
So, an anode rod doubles the life of your water heater by preventing it from corrosion.
These anode rods also have a specific lifetime. Once they are fully corroded, they must need to be replaced. Because if an anode rod has been completely corroded, then it will stop working.
It’s outstanding that the water heater producers see the anode as equivalent to the guarantee. A six-year guarantee water warmer, for the most part, accompanies a .75-inch measurement anode; a nine-year has a .84-inch distance across anode, and a 12-year has either a .90-inch anode or a .75-inch hex anode in its port and a half-length .75-inch combo bar in the hot port.
A combo anode includes an anode/boiling water source/plastic-lined steel areola. A few brands accompany only one of these sorts, while numerous different warmers have hex-head anodes in a different port on top of the radiator or one of each.
One driving supplier will even add four years to the guarantee if somebody pays a handyman to introduce its half-length combo bar in the hot port.
Then again, it is expressed in all the makers’ writing that eliminating the anode voids the guarantee.
Which Anode Rod is better among Magnesium and Aluminum Anode Rod?
They both are good at their places. Aluminum works better when there is a lot of sulfur present in water. So, the Aluminum rod changes sulfur into hydrogen sulfide to reduce the level of contamination. The aluminum anode rod is better for those places where water is hard. Magnesium is used where access chlorines and chlorine are present in water.
Why do we use Magnesium Anode Rod?
Moreover, the magnesium anode rod is good for health. If the PH level in water is high, then magnesium rod can help to reduce it. If there is a high level of chlorines, Chloramines are present in water. It is better to use a magnesium anode rod. Magnesium anodes rode is expected to work better in a place with soft water.
Why do I need to cut an anode rod?
Magnesium rod comes in specific sizes. So, it is better to adjust their size by cutting according to the size of your water heater. So, it may not cause trouble later.
To cut your anode rod, you need the following things:
- Pair of Gloves
- A saw
Till when you need to replace your water heater anode rod?
You need to replace the anode rod after 2 or 3 years. If you buy an anode rod with a warranty, then you need to change it after the warranty period ends. Moreover, if you don’t change your anode rod, then it will become so corroded. It will be of no use.
However, if you change it even after 5 years, it will double the life period of your water heater.
Why do my water heaters smell like rotten eggs?
The reason for the rotten smell is because it contains some traces of hydrogen sulfide. Even if a small amount of hydrogen sulfide is present, it can cause a very unpleasant smell.
For what purpose zinc anode rods are used?
Zinc anode rods are designed in a way so they can eliminate sulfur and bad smell from water.
You can also read the buying guide about hot water recirculating pumps here.
If you are thinking of buying an anode rod for your water heater. Then keep reading this article. We are going to suggest you top 3 Best Anode rods for softened water. It’s going to help you to make a better decision. You can trust these 3 products with your eyes folded, and they will give you the best output and will solve all your water heater-related problems. So, stay in there and keep reading.
Corro-Protec CP-R Water Heater Powered Titanium is our first most recommended product. This product got higher ratings on Amazon as per customer reviews. And the special thing about this anode rod is that it comes with a 20-year warranty. The corro-Protect water anode rod has been many years tested in laboratories. These anode rods protect corrosion inside hot water tanks. It provides permanent protection against corrosion for a longer time. It is adaptable for almost all types of water heaters.
About Fluid Aluminum/Zinc Flexible Anode Rod is the second best-recommended product for you. If you want to get rid of the bad smell, then using an Aluminum/Zinc anode rod is best. Aluminum/Zinc anode rod is a key contributor to get rid of bad smell. It fits in almost all water heaters, and still, if you need to adjust its size, you can do that. It comes with an instruction manual, so no need to hire a plumber. You can do it by yourself. It saves your water tank and saves money too. So, change your anode rod, not Water Heater.
Blue Lightning Magnesium Flexible Anode Rod is the third best-recommended anode rod for our customers. This segmented anode rod comes at a very affordable price. It is also very easy to install. No issues with installing and no leak. Once you have it in your water heater, then just relax, this anode rod will solve the problem of bad smell, and the magnesium rod provides good quality water. It is also very good for your health. It will also extend the life of your water heater. This is just like a product as the doctor prescribes you medicine.
Robert James is an article writer and tool expert. He loves to write about reviews of different products. In addition to that, his other hobbies are cooking, traveling, and gaming.